Text Box: End Use Directions: Sweep or dust mop the floor to remove any debris. The desired concentration will depend on the build-up and age of the polish film. As a starting point, dilute with cold water or mildly warm water as follows. Simply add two quarts of product to a mop bucket. Fill the mop bucket with water up to 5 gallons. The stripping solution may be applied with a mop or automatic scrubber. Allow to stand for 15 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Pick-up the solution and old finish with a wet vacuum or clean mop. Rinse thoroughly with clean cold water. Allow floor to dry completely before applying any floor finish. Text Box: Reliable EPC 6 is a low odor high-powered concentrated stripper that once diluted 1:4, rapidly penetrates and strips off floor finish. A powerful solvent combined with amine, penetrates and removes multiple coats of burnished finish with minimum labor. Low odor formula is idea for use in areas where odors area a concern. This high productivity floor stripper removes floor finishes completely with one pass and requires no neutralizer. This unique formula provides the lowest end-use cost per gallon due to its ultra concentration. DO NOT USE THIS PRODUCT ON WOOD FLOORS OR PAINTED SURFACES.

Features:

· Ultra Concentrated

· Low Odor

· Fast Acting

· Labor Savings

· 1 drum makes 220 gallons

  

Low Odor Ultra Concentrated Floor Stripper

Technical Specifications

 

Appearance                       Clear Liquid

Odor                                 Characteristic

Alkalinity (as NaOH)                       Low

pH (20% Solution)                        <11.5

Foaming                                          Low

Flash Point                                >200°F

Bulk Density        approx. 8.34 lbs./gal.

Solubility in Water                          100%

Coverage                 1,000-2,000 sq. ft.

Butyl Content                                  None

Alkali Residue                                 None

Hard Water Performance                  NA

Freeze/Thaw Stability                   Good

                                                                                                     

 

 

Safety:

Keep out of reach of children. For institutional and commercial use. WARNING: Contains Benzyl Alcohol. Harmful if absorbed through skin. Wear gloves and splash goggles. FIRST AID: Remove contaminated clothing immediately. SKIN: Flush area with large quantities of water for 15 minutes. Seek immediate medical attention. INHALATION: Remove to fresh air. If not breathing, cal 911 or an ambulance, then administer artificial respiration, preferably mouth-to-mouth. INGESTION: If swallowed, contact a poison control center immediately for treatment advice. Do not induce vomiting unless advised to do so by poison control center or doctor. Never give anything to an unconscious person to ingest.

      Recognized for Safer Chemistry

                    www.epa.gov/dfe
Design for the Environment Label

Benefits:

· User Friendly

· Cost Effective

· Ease of Use

· Low Freight Cost

 

Areas of Use:

· Vinyl Tile                               

· Vinyl Asbestos                      

· Asphalt Tile                           

· Linoleum      

· Concrete

· Flagstone

· Terrazzo

· Ceramic Tile